Student Dormitories
Safe, space-efficient beds and storage for boarding and campus housing
Overview
Dormitory furniture must maximise limited room area while guaranteeing safety and durability. Our metal and solid-wood bunk beds, apartment beds with integrated desks, wardrobes and storage are engineered for stability, quiet operation and years of boarding use.
What we provide
Bunk & loft beds
Reinforced metal and solid-wood frames with guard rails, anti-slip ladders and stable ladder fixings.
Apartment beds with desks
Elevated beds with integrated study desk, wardrobe and storage underneath to combine sleeping and study in one unit.
Space-efficient storage
Under-bed drawers, overhead lockers and compact wardrobes that make the most of small rooms.
Built to last
Heavy-duty fixings, powder-coated steel and tested load ratings designed for institutional use.
Space-planning checklist
- Confirm bed occupancy per room and ceiling height for loft/bunk clearance.
- Require guard rails on elevated sleeping surfaces and anti-tip anchoring.
- Combine bed + desk + wardrobe units to reduce furniture count in tight rooms.
- Specify corrosion-resistant frames for humid coastal climates.
Frequently asked questions
Are your dormitory bunk beds safe for students?
Yes. Our bunk and loft beds include full-length guard rails, secure ladder attachment, anti-tip anchoring and tested load ratings, and are manufactured in an ISO-certified facility for institutional use.
Furniture for this space97 products
View all products →
Storage Shelf
Accessories
Single Apartment Metal Bed
Single-tier Metal Beds
Apartment Solid Wood Furniture - Bed
Solid Wood Apartment Beds
Solid Wood Apartment Bed
Solid Wood Apartment Beds
DR Single Bed 02
Single-tier Metal Beds
Single Apartment Metal Bed DR005
Single-tier Metal Beds
Single Apartment Metal Bed DR010
Single-tier Metal Beds
Single Apartment Metal Bed DR041
Single-tier Metal Beds
What to specify for student dormitories
Guide by FurnEdu · educational furniture manufacturer since 2007
Category-level guidance for the furniture ranges used in this space — the points procurement teams should settle before requesting quotations.
Metal Bunk Beds
Double-decker steel beds with guard rails and attached ladders for high-density boarding
- Guard rail fixed to the frame, with stated height and gap dimensions.
- Ladder attached to the frame, with non-slip treads and a stated climb angle.
- Upper and lower headroom measured in the actual room, allowing for mattress thickness.
- Anti-tip anchoring or bracing included in the delivery scope.
Apartment Beds
Raised bed units with integrated study and storage for campus housing and compact boarding rooms
- Platform height, under-bed headroom and desk depth all stated and checked against the room.
- Guard rail height, length and gap dimensions documented.
- Ladder attached to the frame, with non-slip treads and a stable base.
- Storage capacity per student stated in litres or drawer count.
Solid Wood Apartment Beds
Solid timber bed-and-study units for boarding houses and campus housing, finished for institutional life
- Stated timber moisture content and a finish system suited to the destination climate.
- Platform load rating, guard rail height and ladder attachment method all documented.
- Under-bed desk, wardrobe and drawer capacity stated per student.
- FSC claim with licence code, where timber sourcing is a project requirement.
Single-tier Metal Beds
Single-level steel beds for boarding houses, staff accommodation and campus residences
- Stated tube gauge, joint type and load rating for the frame.
- Mattress support type and dimensions confirmed against the mattress specification.
- Fixings specified for the destination climate and the wall construction.
- Feet that protect the floor and allow one-person movement.
Student Dormitory Beds
Boarding-grade beds and bed units specified around guard rails, load ratings and room density
- Bed type, occupancy and room clear height confirmed against the actual room.
- Load rating stated for each sleeping level and for the mattress support.
- Guard rail, ladder and anti-tip anchoring specified by name, not implied.
- Storage capacity per student stated and serviceable.
Standards & planning guides for student dormitories
All guides →Guide by FurnEdu · educational furniture manufacturer since 2007
Student Dormitory Furniture Planning: Beds, Storage and Safety
How to plan student dormitory furniture: bed layouts, storage, guard rails, room density and the safety details that boarding schools must specify.
12 min read · updated 2026-11-04
School Furniture Safety Standards Compared: EU, US, China and Japan
A side-by-side comparison of school furniture standards in Europe, the United States, China and Japan, and how to build one specification that crosses borders.
11 min read · updated 2026-11-04
FSC Certified School Furniture: What the Label Actually Means
How FSC chain of custody works for school furniture, what FSC 100%, Mix and Recycled mean, how to verify a certificate, and what the label does not cover.
10 min read · updated 2026-11-04
School Furniture Cost and Budget Guide: Per-Classroom Planning
How to budget school furniture by classroom and per student, what total cost of ownership includes, and where furniture budgets usually leak.
12 min read · updated 2026-11-04
Ready to furnish your next campus project?
Tell us about your space, quantities and timeline. Our team will reply with a tailored quotation within 24 hours.