16 models · Product category
Single-tier Metal Beds
Single-level steel beds for boarding houses, staff accommodation and campus residences
About the Single-tier Metal Beds range
Guide by FurnEdu · educational furniture manufacturer since 2007
Single-tier Metal Beds are single-level steel beds used where sleeping density is lower and privacy matters more: senior boarding, staff accommodation, medical rooms and campus residences. The category is the simplest in the dormitory range and the one where build quality is easiest to judge, because the frame, the joints and the mattress support are all visible and all accessible to inspection. A single bed is often treated as a commodity, which is why so many school beds fail early at the joint or the mattress support rather than the frame. The specification questions are unglamorous but decisive: the tube gauge, the welding, the number and type of slats or mesh, and the treatment that protects the frame from corrosion in a humid building. The buying points below set out what to check.
Standards and materials
- Frames are engineered to institutional load requirements, with the load rating and mattress support specification documented per model.
- Powder-coated steel with plated or stainless fixings is specified for humid climates and for buildings without full climate control.
- Where composite components are used, boards are specified at ENF or E0 grade with low-VOC finishes.
What to specify before ordering
- Stated tube gauge, joint type and load rating for the frame.
- Mattress support type and dimensions confirmed against the mattress specification.
- Fixings specified for the destination climate and the wall construction.
- Feet that protect the floor and allow one-person movement.
- A sample available for joint and finish inspection before award.
Learning spaces using this range
How to buy single-tier metal beds
Inspect the joints, not the paint
Welded corner joints and load-bearing brackets decide the life of the bed. Ask for photographs of the joints before delivery and inspect them on a sample, because a powder coat hides a poor weld.
Specify the mattress support
Slats, mesh or a solid platform each behave differently for cleaning, ventilation and load spreading. Confirm the support type and the load rating, and check that the mattress cannot slide or fall through.
Choose the corrosion protection
Humid coastal buildings corrode untreated fixings first. Specify a powder-coated frame with plated or stainless fixings, and confirm the coating specification rather than accepting a colour description.
Plan for cleaning access
A bed that cannot be moved for cleaning accumulates dust and lost property. Specify feet that protect the floor and allow the bed to be moved by one person, or a design that gives the cleaning team access underneath.
Anchor the bed where possible
Headboard or frame anchoring prevents movement and damage. Confirm the wall construction and include the fixing kit in the scope. Our [dormitory planning guide](/knowledge-hub/space-planning-guides/student-dormitory-furniture-planning-guide) covers the wider safety detail.
16 Single-tier Metal Beds models
View full catalog →
Single Apartment Metal Bed
DR Single Bed 02
Single Apartment Metal Bed DR005
Single Apartment Metal Bed DR010
Single Apartment Metal Bed DR041
Single Metal Apartment Bed DR011
Single Metal Bed DR004
Multi-function Combo Bed
Single Apartment Bed 064
Single Integrated Steel Frame Bed
Metal Frame Bed with Bookshelf & Wardrobe
Single Metal Loft Bed
Staff Metal Bed
Military-style Bed with Cabinet
Smart Shared Bedside Cabinet
Kids Metal Bed 050
Single-tier Metal Beds — frequently asked questions
Answers by FurnEdu · educational furniture manufacturer since 2007
What is the load rating of a school single bed?
Load ratings vary by model and should be stated by the manufacturer for the frame and the mattress support separately. Ask for the rating including edge sitting, not only the distributed load, because students sit on the edge of a bed far more often than they lie evenly on it.
Are metal beds noisy?
A well-built bed with tight joints and correctly specified fixings is quiet. Squeaks usually come from loose fasteners, a mattress support that moves, or a frame that is not anchored. Specifying welded joints, locking fasteners and an anchoring kit removes most of the cause.
How do I prevent rust in a humid boarding house?
Specify a powder-coated frame with plated or stainless fixings, and confirm the coating specification rather than the colour. Ventilation matters as much as the coating, so avoid pushing beds tight against a damp external wall. Inspect fixings annually and replace them before corrosion spreads.
Can single beds be stacked or stored?
Some designs can be stacked for storage when a room is cleared, but most institutional single beds are not designed for frequent stacking. If the room needs to be cleared regularly, ask for a stackable design and confirm the stack height and the protection between frames.
Do single metal beds need wall fixing?
Anchoring is recommended where the wall construction allows it, because it prevents movement and protects the frame from being pushed repeatedly against a wall. The delivery scope should state the fixing kit and the wall type, and installation should confirm the fixing before the room is used.
Related buying guides
Student Dormitory Furniture Planning: Beds, Storage and Safety
How to plan student dormitory furniture: bed layouts, storage, guard rails, room density and the safety details that boarding schools must specify.
ISO 9001, 14001 and 45001: What They Mean for School Furniture
What ISO 9001, ISO 14001 and ISO 45001 certification actually verifies in a furniture factory, how the three work together, and how to check a triple claim.
School Furniture Procurement: A 2026 Checklist for Facility Teams
A stage-by-stage school furniture procurement checklist for 2026, covering scope definition, compliance evidence, supplier vetting, budget and handover.
Need single-tier metal beds for a campus project?
Send your room list, quantities and delivery country. The project team returns a specification-matched quotation with lead times, normally within one business day.
Request a quote